Views: 2978

ePMP 2000 Access Point with Intelligent Filtering

Product code : 1481617005

The ePMP 2000 Access Point is the core of the ePMP 2000 system, bringing a whole new level of interference tolerant performance to real-world networks at an affordable price. ePMP 2000 builds on the feature-rich, highly scalable performance of ePMP 1000, complete with Frequency Reuse enabled by GPS Synchronization. ePMP 2000 works with existing, proven and globally deployed ePMP 1000 subscriber modules (including Force 180 and Force 200), protecting operator investment and allowing substantial network performance gains without any visits to subscriber locations.



    Industry-Leading Interference Tolerance: Inteligent Filtering hardens ePMP 2000 to strong off-channel interferers and reduces off-channel noise for better radio co-locatin. Smart Beamforming wwith the optional Smart Antenna delivers dramatic performance improvements when dealing with strong co-channel interference.

    Frequency Reuse: GPS Synchronization and Transmit Power Control allow for industry-leading frequency reuse.

    Unmatched Performance and Scalability: With the efficient ePMP MAC protocol and advanced air-fairness scheduler, up to 120 simultaneously active Subscriber Modules can be served without performance degradation.


    • Support up to 120 Subscriber Modules
    • Support a wide frequency rang: 5150 – 5970 MHz
    • 802.3at compliant 100/1000Bast Interface


    Channel Spacing Configurable on 5 MHz increments
    Frequency Range  5150 – 5970 MHz (exact frequencies as allowed by local regulations)
    Channel Width 5 | 10 | 20 | 40 MHz
    MAC (Media Access Control) Layer Cambium Proprietary and optionally standard 802.11n
    Physical Layer 2x2 MIMO/OFDM
    Ethernet Interfaced  100/1000BaseT, rate auto negotiated (802.3af compliant)
    Powering Methods Supported 56V PoE (included), standard 802.3at PoE Supply, or CMM4 with 56V and 5 pin to 7 pin cross over cable adapter
    Protocols Used  IPv4, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping
    Network Management HTTPs, SNMPv2c, SSH Cabium NetworkscnMaestro™
    VLAN 802.1Q with 802.1p priority
    Subscribers per sector Up to 120; Lite version limited to 10
    ARQ Yes Yes
    Nominal Receive Sensitivity (w/FEC) @20MHz Channel MCS0 = -93 dBm to MCS15 = -69 dBm (per branch)
    Nominal Receive Sensitivity (w/FEC) @40MHz Channel MCS0 = -90 dBm to MCS15 = -66 dBm (per branch)
    Modulation Levels (Adaptive) MCS0 (BPSK) to MCS15 (64QAM 5/6)
    GPS Synchronization Yes, via internal GPS or CMM4 with 56V and  5 pin to 7 pin cross over cable adapter
    Quality of Service  Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority
    Power Range 0 to +30 dBm (combined, to regional EIRP limit) (1dB interval)
    Sector Antenna ePMP Sector Antennas available
    ePMP 2000 smart Antenna ePMP 2000 Smart Antenna (C050900D020A) available ( complimentary; doesn replace Sector Antenna)
    Sector Antenna Connection 2x50 ohm, RP (Reverse Polarity) SMA
    Beamforming Antenna Connection 2x50 ohm, RP (Reverse Polarity) SMA, DC coupled (powering antenna)
    GPS Antenna Connection 1x50 ohm, RP (Reverse Polarity) SMA
    Surge Suppression 1 Joule Integrated
    Environmental IP55
    Temperature   -30°C to +60°C (-22°F to +140°F)
    Power Consumption 20 W Maximum
    Input Voltage 44 V to 59 V
    Weight 0.7 kg (1.5 lbs) without brackerts
    Dimensions (h x w x d) 22.2 cm x 12.4 cm x 4. 5 cm (8.75 in x 4.9 x 1.75 in) without brackerts
    Pole Mount Included Yes
    Environmental Cover Included Yes
    Encryption 128-bit AES (CCMP mode)
    FCCID Z8H89FT0020
    Industry Canada Cert  109W-0020
    CE EN 302 502 v1.2.1
    EN 301 893 v1.7.1


Related Products