Views: 2248

Summit X450-G2-24t-10GE4

Product code : summit-x450-g2-24t-10ge4

Summit X450-G2 24 10/100/1000BASE-T, 4 10GBASE-X unpopulated SFP+, two 21Gb stacking ports, 1 Fixed AC PSU, 1 RPS port, fan module slot (unpopulated), ExtremeXOS Edge license



    The Summit® X450-G2 series is based on Extreme Networks® revolutionary ExtremeXOS®, a highly resilient OS that provides continuous uptime, manageability and operational efficiency. Each switch offers the same high-performance, nonblocking hardware technology, in the Extreme Networks tradition of simplifying network deployments through the use of common hardware and software throughout the network.
    The Summit X450-G2 switches are effective campus edge switches with IEEE 802.3at PoE-plus. The Summit X450-G2 series is also an option for DSLAM or CMTS aggregation, or for active Ethernet access.


    • All models come equipped with either 4 ports of SFP+ 10 GbE or 4 ports of SFP 1GbE resident on the faceplate of each model.
    • Up to eight Summit X450-G2 switches can be stacked using two different methods of stacking: SummitStack-V, and SummitStack-V84. Each X450-G2 unit comes equipped with 2 ports of 21 Gigabit stacking ports via a QSFP interface. Standard passive 40Gb copper cables can be used for stacking X450-G2s together.
    • ExtremeXOS supports the SummitStack-V capability using 2 of the native 10 GbE ports on the faceplate as stacking ports, enabling the use of standard cabling and optics technologies used for 10 GbE SFP+, SummitStack-V provides long-distance stacking connectivity of up to 40 km while reducing the cable complexity of implementing a stacking solution.
    • The Summit X450-G2 also supports high-speed 84 Gbps stacking, which is ideal for demanding applications where a high volume of traffic traverses through the stacking links, yet bandwidth is not compromised through stacking.


    • Switching Bandwidth: 212Gbps
    • Forwarding rate: 157.7Mpps
    • Less than 4 microsecond latency (64-byte)
    • Layer 2/MAC Addresses: 68K
    • IPv4 LPM Entries: 16K
    • IPv6 LPM (64-bit) Entries: 8K
    • IPv6 LPM (128-bit) Entries: 256
    • 4094 VLAN/VMANs
    • 9216 Byte Max Packet Size (Jumbo Frame)
    • 128 load sharing trunks, up to 32 members per trunk
    • 1,024 ingress bandwidth meters
    • Ingress and egress bandwidth policing/rate limiting per flow/ACL
    • 8 QoS egress queues/port
    • Egress bandwidth rate shaping per egress queue and per port
    • Rate Limiting Granularity: 8 Kbps
    • All ports Full Duplex - half duplex operation is not supported
    • Policy Profiles: 63
    • Rules per Profile: Up to 928
    • Authenticated Policy Users per Switch: Up to 1024
    • Authenticated Policy Users per Port: Up to 1024
    • Unique Permit/Deny Rules per switch: 952
    • MAC Rules: 256
    • IPv4 Rules: 256
    • IPv6 Rules: 256
    • L2 Rules: 184
    • Rate Limiting: Per Class of Service
    • 64-bit MIPS Processor, 1 GHz clock, dual core
    • 4GB eMMC Flash
    • 4MB packet buffer
    • Per port status LED including power status
    • System Status LEDs: management, fan and power
    • 7 segment display of stack number
    • 24 x 10/100/1000BASE-T (RJ-45)
    • 4 x 10GBASE-X SFP+ (unpopulated ports)
    • 1 x Serial (console port RJ-45) with RTS/CTS modem control
    • 1 x 10/100/1000BASE-T out-of-band management port
    • 1 x USB 2.0 port for external USB flash
    • 2 dedicated QSFP-form factor 21Gbps stacking ports on the rear panel